2204982 - Wilo Singapore Sales

BRAND	Wilo
Product	2204982
Description	Dry rotor single pump WITH frequency converter
Internal code	IMP4718819
Technical specification	Yonos GIGA2.0-I 40/1-26/3.0 Inline pump with high energy efficiency with EC motor of the Efficiency class IE5 in accordance with IEC 60034-30-2, hydraulic Minimum efficiency index MEI = 0.4 and electronic Power adjustment in dry runner design. The pump is designed as a single-stage low-pressure centrifugal pump with flange connection and mechanical seal. The Yonos GIGA2.0-I is a priority for pumping heating water (according to VDI 2035), cold water and water-glycol mixtures without abrasive materials designed in heating, air-conditioning and cooling systems. Construction: - Single-stage low-pressure centrifugal pump with undivided shaft in Block construction - inline spiral housing (suction and discharge pipe with same flanges in a line) - PN 16 flanges - in accordance with EN 1092-2 - Pressure measurement connections (R 1/8) for attached Differential pressure transmitter (version... -R1 without differential pressure sensor) - pump housing and lantern/motor flange as standard with cataphoresis coating - Mechanical seal for water delivery up to Tmax. = +120°C. Up to T = +40°C, a glycol admixture of 20% to 40% is Volume percentage allowed. In the case of water-glycol mixtures with fractions Glycol > 40% to max. 50% by volume and one Media temperature from > + 40°C to max. +120°C or others Media other than water is an alternative Provide a mechanical seal. - Supply voltages: 3~440 V +-10% 50/60 Hz; 3~400 V +-10 % 50/60 Hz; 3~380 V - 5% +10% 50/60 Hz Rule types: - Variable differential pressure (dp-v) - Constant differential pressure (dp-c) - Constant speed (n-const.) - User-defined PID control Features: - Dual pump operating modes: main/reserve mode, Efficiency-optimized addition mode for dp-c and dp-v - Integrated full motor protection Display on the “home screen” of the graphical display: - Currently set control type - Current target value - Current actual value - Current flow rate (only when connected differential pressure sensor) - Current power consumption Execution: - 1 analog input: 0... 10 V, 2... 10 V, 0... 20 mA, 4... 20 mA only for sensor value from differential pressure sensor - 1 analog input: 0... 10 V, 2... 10 V, 0... 20 mA, 4... 20 mA only for external setpoint sensor - 1 digital input (Ext. OFF) - 1 alarm relay for optional use for operational or fault messages - Slot for Wilo-CIF modules with interfaces for GA building automation (optional accessories: CIF Ethernet modules, Modbus RTU, BACnet MS/TP, LON, PLR, CAN) - Wilo Net as a Wilo system bus for communication with double pump operation - Automatic emergency operation in special conditions (pump speed can be defined) e.g. in the event of failure of Bus communication or from sensor values - Rotatable graphical color display (2 inch) operated via One button hand control panel - Integrated double pump management (double pumps are ready wired), when using 2 individual pumps as Double pump unit, connection via WILO Net - Cable break detection with an analog signal (in connection with 2 ... 10V or 4... 20mA) - Standard condensate drain holes in the motor housing (with Delivery locked) - vent valve on the lantern Package includes: - pump - Installation and operating instructions and declaration of conformity Accessories (must be ordered separately): 3 consoles with mounting material for foundation construction - Blind flanges for double pump housings - To connect to building automation: - CIF PLR module - LON CIF module - BACnet MS/TP CIF module - Modbus RTU CIF module - CANopen CIF module - Ethernet multiprotocol CIF module (Modbus TCP, BACnet/IP) - M12 RJ45 CIF Ethernet connector - DDG 2... 10V differential pressure transmitter - DDG 4... 20mA differential pressure transmitter Operational data Delivery medium: water 100% Media temperature: 20.00 °C Requested flow rate: 24.00 m³/h Requested delivery height: 21.00 m Media temperature: -20... 120 °C Ambient temperature: 0... 50 °C Maximum operating pressure: 16 bar Minimum efficiency index (MEI): ≥ 0.4 motor data Motor efficiency class: IE5 Interference emission: EN 61800-3 Immunity to interference: EN 61800-3 Power supply: 3~400V/50 Hz Rated motor power: 3 kW Max. speed: 2960 rpm Nominal current: 5.3 A Insulation class: F Motor protection class: IP55 Motor protection: KLF integrated materials Pump housing: 5.1301/EN-GJL-250 Impeller: PPE/PS-GF30 Wave: 1.4021 Shaft seal: AQ1EGG Lantern: 5.1301, EN-GJL-250 KTL coated Installation dimensions Suction side pipe connection: DN 40, PN 16 Pressure-side pipe connection: DN 40, PN 16 Overall length: 320 mm

Please Contact Us to Order to offer competitive prices and delivery time for Wilo - 2204982 Dry rotor single pump WITH frequency converter number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Singapore Industrial products Market.

WE SELL ONLY NEW AND ORIGINAL PRODUCTS!

Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.