logo

Verkauf von ARDETEM Produkte in Singapore

ARDETEM is offered by Impexron GMBH for years at reasonable prices and delivery time to Singapore . Check our web page for products from the brand ARDETEMregardless if they are not stated on our website, do not hesitate to contact us for all future product enquiries. Our products are delivered to your door with our wide distribution network throughout Singapore .

Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.

Brand products ARDETEM

µCONSOLE LCD

Display / Detachable programming unit for all Ardetem devices

20008

DRB-5 TPI DIN rail holder Connecting terminal / connector for Hat rail for the power supply and bus for two devices, a connector is required

20064 PECA11D2RF

Three-phase universal analyzer Disturbancen Three-phase universal analyzer interference 3 or 4 wire three-phase systems, reading out balanced and unbalanced networks 2 R-2 relay outputs NO F - Modbus TCP Ethernet output Display: 96 x 96 backlit Display up to 50 parameters Upper and lower wave analysis 2 programmable voltage ranges Un = 100V LN / 173V LL and 330V LN / 600V LL 2 programmable current areas A 0..1 and 0..5 A Universal power supply AC / DC Reaction time 40 ms (2 cycles) Standard output RS 485 Modbus Customs tariff number: 9030390090 Country of origin: France / EU

20085

TPIs 50 N F / I converter Ethernet single-channel frequency converter Input: contact, logic, Namur, NPN / PNP Analog output: 0 - 20 mA, 0 - 10 V PC programmable with software SUPERVISION via USB port or Ethernet

20090

TPIs 12 transmitters with process input 1 analog output Transmitters with process input in 7.2 mm-housing Input: mA; mV; V 1 Analog output: 0 - 10 V; 0/4 - 20 mA active Power: 24 VDC PC programmable with software SUPERVISION via USB port

20164 PECA11D2RF

Universal phase analyzer Disturbancen AC universal analyzer for interference 3 or 4 wire three-phase systems, reading balanced and unbalanced networks 2 R-2 relay outputs NO F - Modbus TCP Ethernet output Display: 96 x 96 with backlight Display up to 50 parameters Upper and lower wave analysis 2 programmable voltage ranges Un = 100V LN / LN 173V LL and 330V / 600V LL 2 programmable current ranges 0 to 1 A and 0 .5 A Universal Power Supply AC / DC 40ms response time (2 periods) Standard output RS 485 Modbus Customs tariff number: 9030390090 Country of origin: France / EU

20182 TRM4 2A

TRM4 2A Universal three-phase analyzer Universal three-phase analyzer 3 or 4 wire three-phase systems, reading balanced and unbalanced networks Input: Voltage 0 3 .150 VAC, 0 ... 500 VAC Output: 3 Current 0 .1 0 .5 A and A (automatic switching) Universal power supply AC / DC Response time 40ms (two periods) Outputs 2 x analog bipolar) PC programmable with software SUPERVISION Possible options: Up to 5 programmable analog 0 ... 20mA, 4 ... 20mA, 0 ... 5 mA two of these bipolar) 4 output relays without analog output, or 2 Relay outputs with max. 2 analog outputs Ethernet Profibus DP • Overload: 10 times the rated current for 10 seconds • 50 times rated current (EDF standard) for 60 ms

20223 DIP40 0A1 R

Display with bi-directional Process input, analog output + 2 relays Digital display 48 x 96mm, 4 digits bidirectional process input (mA, mV, V) mA output active and 2 relays Universal power supply 24 - 240VAC / DC via front panel or by means of PC and software SUPERVISION

20223 DIP400 A1 R

Display with bidirectional process input

20224 DIP402 R

Display 48 x 96mm with Universal Input + 2 relays in the output Digital display 48 x 96mm, 4 digits Universal input mA, V, temp. Potentiometer resistance 2 relays in the output Universal power supply 24 - 240VAC / DC via front panel or by means of PC and software SUPERVISION

ART.NR. 20009

Supervision programming tool Software to program the ARDETEM Devices including USB interface and connection cables

ART.NR. 20012

μCONSOLE LCD Display / Removable programming unit for all Ardetem devices

ART.NR. 20017

TPI 10 AR universal transmitter with Analog output and 2 relays TPI 10 AR Universal Input: current, voltage, temperature resistance Output: Analog (current / voltage), 2 relays Programmable with display / PC Universal power supply: 20-300 VDC / VAC

DIP 400

digital indicator

PECA 30 ES

analyzer with TPS, network analyzer to measure, AC voltage in special design

PECA11

ELECTRICAL MEASURE CENTRAL Current input: 1A and 5 A AC Voltage input: 175 V and 600 V AC For all network types Graphical LCD with rear-lighting 28 measurable parameters: 3U, 3V, 3I, cos, f, F, P, Q, S, E... Display of the energies on 8 digits on a single line with automatic switching to the upper unit Automatic correction of the wiring Output: RS 485 Modbus/Jbus Universal power supply; 20 to 270 vac and 20 to 300 vdc Format: 96x96mm

PECA11 DC 15-50

Measurement of DC signals - Dimensions 96x96x108mm -LCD ,DC networks

PECA3001

Signal analyzer for electrical networks

SP 125 ARD

Ground Fault Module

TAI 60

programmable transmitter

TMA-HI

AC MEASURE TRANSMITTERS - high insulation 4KV. Input 0-5A and standard output 4-20mA Galvanic partition: 4Kv Accuracy rating: <0.3% Power supply: 20 to 270 Vac and 20 to 300 Vdc

TMP

DC MEASURE TRANSDUCER / DC CONVERTER Input / input: 0-1000 VDC Output / output: 4-20 mA Galvanic partition / galvanic isolation: 2KV Accuracy rating / accuracy: 0.2% For DIN rail mounting / for DIN rail mounting Power supply / power supply: 20 ... 270 Vac and 20 ... 300 Vdc

TMP-HI-2

TMP-HI-2 EXCITATION CURRENT TRANSDUCER ,I/P : 75A/100mV O/P : 4-20 mA AUX : 90-270 VAC, 88-350 VDC 2-WIRE SENSOR

TMvP-HI-3-SP12/05

Universal current and voltage transmitter

TPI400 A

PROGRAMMABLE CONVERTER Input: mA,mV,V. Bidirectionnal current and voltage input up to +/- 300 V dc Accuracy rating: 0.1% Programmable scale factor Supply for 2-wire sensor Insulated analog output (voltage or current) For DIN rail mounting Programmable by software or µconsole (optional) Universal power supply: 20 to 270 vac and 20 to 300 vdc

TRM 2

A three-phase analyzer for synchronous networks Three-phase analyzer for synchronous networks DIN-rail mounting AC indicator for exchange or Three-phase systems Voltage input 0 1 .150 VAC, 0 ... 600 VAC + 20% 1 Current input 0 .1 0 .5 A or A (automatic switching) Spanungsversorgung Universal AC / DC Response time 40ms (two periods) 1 analogue output Programmable with Display (LCD μCONSOLE) or PC

Contact us for request