BRAND | ARI |
Product | 100283506-021 |
Internal code | IMP4519586 |
Technical specification | Figure 55,440 DN 50 ARI-STEVI 440 Straight type control valve with flanges 1.4408 DN 50 Nominal pressure: PN 40 Flange drilling: according to DIN PN40 Cone design: * parabolic cone Leakage class IV S1 Kvs value: 40 Characteristic curve: equal percent Execution: * Oxygen version Oil-free and grease-free for oxygen Spindle seal: * PTFE packing with BAM approval max. 60 °C Final acceptance test: APZ EN10204 3.1 Acceptance material testing: APZ EN10204 3.1 Drive: DP33 Complementary product description: * HP max. 14 bar TS max. 30°C Effectively (b.pneum.antr): Spring closes in case of air failure feathery. (bar) /stroke (mm): 2.30-3.70 stroke 20 mm Erford. Setting pressure (bar): 4.5 bar max. admissible Setting pressure (bar): 6 max. closing pressure (bar): * 14 Distance column length: L1=199mm Distance column spacing: 100 mm Coupling: M10 thread Positioner: EPS 33 Input signal: 4 - 20mA 2-wire Adjusted: 4 mA valve closed Inlet with ventilation air (bar): 6 bar |
Please Contact Us to Order to offer competitive prices and delivery time for ARI - 100283506-021 number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Singapore Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
ARI-PREMIO electric thrust actuator
Rolling diaphragm for ARI-DP33
Rolling diaphragm
set of springs
guiding band
o-ring
actuator
shut-off valve
thrust drive
ARI-PREMIO 2,2 kN (s/n: 444070)
Servo motor
Floating steam trap with membrane capsule for start-up venting
board carrier
board carrier
3-waz valve actuator
Interflange check valve