BRAND | ProMinent |
Product | GMXA1602PPE20000UA1030BDE |
Description | GAMMA_X magnetic dosing pump |
Internal code | IMP4855581 |
Custom code | 84135040 |
Technical specification | The gamma X is a user-friendly magnetic Diaphragm metering pump which for trouble-free Dosing process ensures. The integrated pressure measurement with display In addition to higher safety, provides compensation of pressure fluctuations in the process for optimal chemical consumption. Total series output range: 2.3 l/h — 45 l/h, 25 — 2 bar (Delivery rate/pressure, see offered pump type/identification code) - Easy adjustment of the dosing rate directly in l/h or in gph - Trouble-free process flow through recognition of hydraulic Failures such as gas in the dosing head, “excess pressure” and “no Pressure "(no or too high back pressure) - Thanks to the controlled magnetic drive for continuous Suitable for small quantities starting from approx. 1 ml/h — therefore also Avoiding vibration damage due to low pulsation Dosing characteristics • as a result, no need for pulsation dampers or mixers (in the lower or middle performance range of the pump). - highest dosing accuracy through compensation of Pressure fluctuations - Integrated 1-week/1-month timer - In concentration mode, direct entry of the desired Final concentration for dosing tasks in proportion to the volume - Can be used for almost all liquid chemicals thanks to available material variants PVDF, acrylic glass, PP, PTFE and inox Technical details: ********************** • External control via potential-free contacts with pulse Translation/translation • Batch operation with max. 99,999 strokes/start pulse • Options include optical membrane break detector, external Control via mA signal, relay modules (e.g. 4-20 mA output), self-venting dosing head versions as well as Bluetooth function • Selectable connections to process control systems via BUS Interface such as PROFIBUS®, PROFINET®, Modbus or CAN bus Pump type: 1602 - 16bar; 02 l/h then 6x4/SS6x5 Dosing head material: PP - polypropylene Seal material: E - standard membrane /EPDM sealing Dosing head design: 2 - with vent; o.valve spring Hydraulic connection: 0 - standard connection Membrane break detector: 0 - without Version: 0 - RAL5003/hood RAL2003 Logo: 0 - with PM logo Power module design: U - Universal 100-240V Cables and plugs: A - 2m Europe Relay function: 1 - 3-pin 230V relay Accessories: 0 - without accessories Control variant: 3 - manual+cont.m.PulseCont. +Anal. Dosing monitoring: 0 - dynamic dosing monitoring Remote stop (pause): B - with Bluetooth Language: DE - German Approval: 01 - CE Documentation language: DE - German Frequency (Hz): 50/60Hz Voltage (V): 100-230V Power (W): 25W Protection class: IP66/NEMA4X Delivery rate (l/h): 2.3 l/h Back pressure (bar): 16bar |
Please Contact Us to Order to offer competitive prices and delivery time for ProMinent - GMXA1602PPE20000UA1030BDE GAMMA_X magnetic dosing pump number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Singapore Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
Series: BT5B BETA 5 - pump Version B Pump type: 0713 07 bar, 13l / h Anschl.8x5 / SS8x7 Dosing head: PP polypropylene Seal material: B Standard Membr. m.FPM-B seal. Dosing head: 2 m.Entlüftung, o.Ventilfeder Hydraulic Conn: 0 standard connection Format: 0 Geh.RAL5003 / hood RAL2003 Logo: 0 with PM-Logo Voltage version: U Universal 100-240 V Cables and connectors: A 2m Europe Relay function: 0 without relay Accessories:. 1 Dos.v.u.Fußv, 2mSchl.5mPE Schl Control Type: 0 no lock Control variant: 0 Pulse Control Remote Stop: 0 Pause break contact, Niv opener. Auxiliary: 0 = external frequency 180max Admission: 01 CE Frequency (Hz): 50 / 60Hz Voltage (V): 100-230V Power (W): 21,2W Protection: IP65 Capacity: 11,0l / h Back pressure: 07bar
DOSING PUMP
magnetic metering pump
ClO2 measuring cell connection / Diameter: 2-pol./25 mm Measuring range: 0,02..2 mg / liter Parameter: chlorine dioxide pH range: 5,5..9,5 Temperature / Pressure: 5..45 degrees C / 3 bar Flow: 30..60 L / h Installation length: 221 mm Order number: 792929
Chlorine sensor Amperometric two-electrode cell with diaphragm cap, flow-independent, stable zero point, integr. Temperature compensation. Typical applications: drinking water, dechlorination Terminal / diameter: mm 2-pol./25 Measuring range: 0,01..0,5 mg / liter Parameter: free chlorine pH range: 5,5..8,0 temperature / pressure: 5..45 degrees C / 1 bar Flow: 30..60 L / h Installation length: 221 mm Order number: 792927
Conductivity sensor DE01, DE02, HY01, HY02, TCS
Chlorine Analyzer (Dulcometer) Power Supply 230VAC/0.05A
Controller DULCOMETER D1Cb Identcode: D1CBW00601000VD1201G00EN Series: D1Cb D1Cb DULCOMETER Mounting: W wall mounting IP65 Design: 00 + LCD keyboard, with PM Logo Operating voltage: 6 90-253 VAC 50/60 Hz Approvals: 01 CE mark Hardware extension: 0 No Hardware extension: 0 No External connection: 0 No Software preset: preset V software Preset Meas: D chlorine dioxide Terminal of the Meßgröß: 1 mA Correction quantity: 2 Temp.Pt100 via terminal (pH, conductivity) Control input: 0 No (default) Signal output: 1 1 analogue signal output 0 / 4-20mA Power activation G Alarm + 2 limit values (Standard) Pump control: 0 Without (standard) Control behavior: 0 No (default) Default speech bubble: EN English (British) Frequency: 50/60 HZ Voltage: 90-253 VAC Power: 12 W ~ Protection: IP65
DOSING PUMP
DHV-RM REPLACED BY > DHV-U DN25 PVT
VALVE, RLF, THD, 1.5 ", PROMNT, DHVRM, 1000056
PUMP
Pressure-sustaining valve
spare
(Series: DLTA Delta Optodrive- version A, pump type: 02bar 0280, 75 l / h conn.DN10)
delta -optodrive ProMinent delta(R) Magnet-Membrandosierpumpe
Series: DLTA Delta Optodrive- Version A Pump type: 04bar 0450, 49 l / h conn.DN10 Dosing head: PV PVDF Seal material: T Standardmembr. / PTFE sealing. Dosing head: 2 m.Entlüftung, o.Ventilfeder Hydraulic Conn: 0 standard connection Diaphragm failure monitor: 0 None Version: 0 With PM-Logo Execution performance: U universal controller 100 - 240 V Cables and connectors: A 2m Europe Relay function: 1 alarm sloping Accessories: 1 Dos.v. 1/2 "and Fußv. Control variant: 3 Manual + analog current PC + Security Options: 0 no access control Language: English EN Remote Stop: 0 Pause break contact, level Opener Admission: 01 CE Frequency: 50-60Hz Voltage: 100-240V Power: 73W Protection: IP65 Capacity: 49,0l / h Back pressure: 04bar
Series: DLTA Delta Optodrive- Version A Pump Type: 1020 10bar, 19,1l / h con.12x9 / SS12x10 Dosing head: PV PVDF Seal material: T Standardmembr. / PTFE sealing. Dosing head: 3 m.Entlüftung, m.Ventilfeder Hydraulic Conn: 0 standard connection Diaphragm failure monitor: 0 None Version: 0 With PM-Logo Execution performance: U universal controller 100 - 240 V Cables and connectors: A 2m Europe Relay function: 0 without relay Accessories: 0 without accessories Control variant: M control module 4 -20 mA Security Options: 0 no access control Language: DE German Remote Stop: 0 Pause break contact, level Opener Admission: 01 CE Frequency: 50-60Hz Voltage: 100-240V Power: 73W Protection: IP65 Capacity: 19,1l / h Back pressure: 10bar
Series: DLTA Delta Optodrive- Version A Pump Type: 1612 16bar, 11,3l / h conn.8x5 / SS8x7 Dosing head: SS stainless steel Seal material: T Standardmembr. / PTFE sealing. Dosing head: 0 o.Entlüftung, o.Ventilfeder Hydraulic Conn: 0 standard connection Diaphragm failure monitor: 0 None Version: 0 With PM-Logo Execution performance: U universal controller 100 - 240 V Cables and connectors: A 2m Europe Relay function: 3 Fail safe appealing Accessories: 0 without accessories Control variant: 3 Manual + analog current PC + Security Options: 0 no access control Language: English EN Remote Stop: 0 Pause break contact, level Opener Admission: 01 CE Frequency: 50-60Hz Voltage: 100-240V Power: 73W Protection: IP65 Capacity: 11,3l / h Back pressure: 16bar
Plug valve Order number: 1018190
dosing container
Fasspumpe