Phoenix Contact is offered by Impexron GMBH for years at reasonable prices and delivery time to Singapore . Check our web page for products from the brand Phoenix Contact regardless if they are not stated on our website, do not hesitate to contact us for all future product enquiries. Our products are delivered to your door with our wide distribution network throughout Singapore .
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
CONTROL DIGITAL
D-SUB sleeve housing, protection class: IP20, material: ABS, metallized, cable exit: angled, housing size: 1, colour: metallic blank
sleeve housing D7, for vertical bracket, material: PA, cable outlets: 1, straight, 1x M20, height: 77.6 mm, cable gland: with, standard
Contact insert, number of poles: 4+PE, size: D7, number of connections per pole: 1, pin, push-in connection, 230 V/400 V, 10 A, 0.14 mm²... 1.5 mm²
Contact insert module, number of poles: 3, power contacts: 3, control contacts: 0, pin, crimp connection, 500 V, 40 A, 1.5 mm²... 6 mm², application: power
Contact insert module, number of poles: 5, power contacts: 5, control contacts: 0, pin, push-in connector, 400 V, 16 A, 0.14 mm²... 2.5 mm², application: power
HeavyCon blind module, for remaining slots in the module carrier frame
mounting housing D7, with longitudinal bracket, material: PA, height: 25.5 mm, cable screw connection: none, standard
Contact insert, number of poles: 4+PE, size: D7, number of connections per pole: 1, socket, push-in connection, 230 V, 10 A, 0.14 mm²... 1.5 mm²
Protective cover D7, for vertical bracket, material: PA, protective cover material: PA, height: 30 mm, seal: yes, standard, lanyard diameter: 4 mm, with safety line, for socket inserts
mounting housing D7, with longitudinal bracket, material: PA, protective cover material: PA, height: 25.5 mm, cable gland: none, protective cover: yes, standard, for socket inserts
Contact insert module, number of poles: 9, design: D-SUB 9, pin, crimp connection, 48 V, 1 A, 0.08 mm²... 0.5 mm², application: data, without crimp contacts
Contact insert module, number of poles: 4, power contacts: 4, control contacts: 0, pin, crimp connection, 690 V, 40 A, 1.5 mm²... 6 mm², application: power
Contact insert module, number of poles: 3, power contacts: 3, control contacts: 0, jack, crimp connection, 500 V, 40 A, 1.5 mm²... 6 mm², application: power
Contact insert module, number of poles: 5, power contacts: 5, control contacts: 0, socket, push-in connector, 400 V, 16 A, 0.14 mm²... 2.5 mm², application: power
Contact insert module, number of poles: 9, design: D-SUB 9, jack, crimp connection, 48 V, 1 A, 0.08 mm²... 0.5 mm², application: data, without crimp contacts
D-SUB sleeve housing, protection class: IP20, material: die-cast zinc, cable outlet: straight, housing size: 1, colour: metallic blank
protective cover B16, for crossbar, protective cover material: PC, height: 26.4 mm, seal: no, lanyard diameter: 40 mm
Protective cover B6, for vertical bracket, protective cover material: PC, height: 26.3 mm, seal: no, catch hole diameter: 40 mm
signal separator
Power suppression filter
Sensor-actuator patch cord
Sensor-actuator patch cord
Sensor/actuator connectors
Replacement electronics module